BT-S1 1000M BLUETOOTH MOTORCYCLE INTERCOM MOTORBIKE HELMET INTERPHONE FM RADIO

BT-S1 1000m interphone Bluetooth motorcycle motorbike helmet intercom headset
Wireless headset for Bluetooth enable cell phone at a range of up to 10 meters
Bike-to-bike intercom for rider and passenger or two separate bikes up to 800 - 1000 meters
Up to 10 hours talk time when connected to cell phone
Up to 6 hours talk time when using the intercom feature
Up to 300 hours standby
Call out, call answer, call reject, call hang up
Receive a cell phone call automatically
Support audio transfer
FM Radio function
Enjoy the cell phone music through A2DP or connect GPS
Control cell phone music through AVRCP, forward, backward, play, pause
Automatic switching among Bluetooth cell phone, intercom, stereo music
With DSP echo cancellation and noise suppression technology, crystal clear voice quality is guaranteed in a high speed
Button panel is water-proof and sun-proof, while the design is durable

Turning the unit on into standby mode:
Press and hold the power / intercom button at the end of the unit. After 3 seconds you will hear a “Di” and the Blue LED will begin to flash. Led go of the button and the unit is now in standby mode.

Turning off the unit:
Press the power / intercom button for 5 seconds or until you hear 2 “ Di” tones and the lights extinguish.

To pair to your Bluetooth enabled mobile phone:
When the unit is off, press and hold the power / intercom button at the end of the unit. Hold the button until you see a RED AND BLUE light flashing. It normally takes around 5-8 seconds from off. Do not let go when you see the blue light. You will also hear a “DuDu” tone when the unit enters pairing mode. On your phone, search and attempt to pair to the device, when the device is flashing red and blue. If requested the pairing code will be 0000 and you should set the phone to auto pair to the device

Phone Controls:
To answer a call: Short press the Phone button once
Auto receive call: Dependent on the phone the unit will automatically answer the call after 8-16 seconds of ringing.
To reject a call: Press the MFB and hold until you hear a “Du” (around 2 seconds)
To end a call: Whilst call is active short press the Phone button once
To go to a phone call during an intercom call: Press and hold the Phone button for 2 seconds until you hear a “Du”

Note: Depending on the phone some or all of these functions may not work, or operate differently.